Myron-l PS6FCE User Manual download pdf (Page 17)

7. Wait for the readings to stabilize. When the mV and ppm values

are unchanging for 5 consecutive readings, the FC

reading

has reached a stable level. This may take 1 to 2 minutes.

NOTE: If the reading takes more than 1 minute to stabilize,

press the

after 1 minute to prevent Auto oFF feature

from disturbing the measurement process. Annunciators will

alert you when either the pH or ORP of the nal FC

ppm value

are Out of Range (“-Or-”).

8. Press MS to store reading in memory if desired.

3. FC

Immersion Method

NOTE: Use this method for pools, spas and other large standing bodies

of water.

1. Hold instrument beneath the surface of the water to avoid

surface effects on the water’s chemistry.

2. Swirl the instrument around for at least 10 seconds to thoroughly

rinse the cell cup and sensor well.

3. Continue holding the instrument under the surface while taking

the reading.

4. Press .

5. The instrument will begin alternating between a predicted nal

ORP value and a free chlorine equivalent concentration in ppm.

Both readings will change rapidly at rst.

6. Wait for the readings to stabilize. When the mV and ppm values

are unchanging for 5 consecutive readings, the FC

reading

has reached a stable level. This may take 1 to 2 minutes.

NOTE: If the reading takes longer than 1 minute to stabilize,

press after 1 minute to prevent Auto-OFF feature from

disturbing the measurement process. Annunciators will alert

you when either the pH or ORP of the nal FC

ppm value are

Out of Range (“-Or-”).

7. Press MS to store reading in memory if desired.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

No comments

Myron-l PS6FCE User Manual Page 17