Myron-l PS6FCE User Manual download pdf (Page 27)

A. Memory Storage

1. While displaying a

measurement, press

to record the

displayed value.

2. “MEMORY” will appear

and the temperature display

will be momentarily replaced

by a number (1-100) showing the position of the record. Figure

8 shows a reading of 1806 µS stored in memory record #4.

B. Memory Recall

1. Press any measurement key.

2. Press , “MEMORY” will appear, and the display will

show the last record stored.

3. Press

to scroll to the record location desired

(the temperature display alternates between temperature

recorded and location number).

4. Press to display time and date stamp.

5. Press any measurement key to leave memory recall or allow to

automatically turn off.

C. Clearing a Record/Memory Clear

After recalling a certain record location, press and HOLD

clear that memory. This space will be the place for the next memory

record, unless you scroll to another empty position before ending the

recall sequence. The next memory stored will go into the next highest

available memory location.

Example:

You have locations 1-7 lled and wish to clear the

conductivity reading stored in record location #3 and replace it with a

pH reading.

1. Press and scroll to location #3.

2. Press and HOLD

to clear old record #3.

3. Fill pH/ORP sensor well with sample.

Figure 8

°C

KCl

COND

MEMORY

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

No comments

Myron-l PS6FCE User Manual Page 27